新闻中心
标题:  U型槽模具的广泛应用的适用范围 浏览2次

一般的U型槽模具使用方法都是通过模具进行预制生产,在制造U型槽模具的过程中,要根据提供的具体规格以及样式图进行模具的生产工作。

Generally, the use of U-groove die is prefabricated through the die. In the process of manufacturing U-groove die, the production of the die should be carried out according to the specific specifications and patterns provided.


根据U型槽模具的制造与用途,很多u型槽的预成形形状,个别地区的风格使用矩形或者梯形。U型槽模具有多种形状的存在,弧度不同形状不同

According to the manufacture and use of U-groove dies, many U-grooves have preformed shapes, and the styles of individual areas are rectangular or trapezoidal. There are many shapes in U-groove dies, and different radians have different shapes.

所以尽管大体规格都差不多,但是U型槽模具的制作却精准的测量,这样才能生产出符合要求的U型槽,在生产前需要图纸进行确认,按图纸进行生产制作产品,品质一般都是没有问题的。

Therefore, although the general specifications are similar, the manufacture of U-groove die is accurate measurement, so as to produce U-groove that meets the requirements. Before production, drawings are needed to confirm, and products are produced according to drawings. Generally, the quality is no problem.

                    


一般常见的有农田灌溉使用的U型槽模具,它是一个圆弧形的底部面积,根据水流通过的多与少,来设计上口处扩大还是缩小范围程度,越是敞口的设计,就越能够体现在预制过程中的脱模方便性

The common U-shaped groove mold used for farmland irrigation is a circular arc bottom area. According to the amount of water flowing through it, it can be designed to expand or narrow the scope of the upper outlet. The more open the design, the more convenient the demoulding in the prefabrication process can be embodied.


因为这种模具是采用钢板材质进行生产的,圆弧的底部,也就是成型之后水泥U型槽与土壤进行接触的一面,因此伤口大,底口小才是最佳的短期预制成型的设计要点。


Because this kind of mould is made of steel plate, the bottom of the arc, that is, the contact side between cement U-groove and soil after forming, so the big wound and small bottom is the best design point of short-term prefabrication.

版权所有:保定沣达模具制造有限公司
手机:15175361168 电话:0312–6793280
地址:河北省保定市清苑县阎庄乡南阎庄村公司
Keywords:流水槽模具,U型槽模具,电缆槽模具,遮板模具