新闻中心
标题:  U型槽模具使用按照使用工程样式而定 浏览2次

U型槽模具广泛应用于高速公路、公路、铁路为主,使用拼接型的水沟为主,因为对于U型槽预制块的制作要求比较严格,必须要求表面光滑

U-shaped groove die is widely used in expressways, highways and railways, mostly in spliced ditches, because the production requirements of U-shaped groove prefabricated blocks are more stringent, and the surface must be smooth.


所以对于模具的选择全部是以塑料模具为主,如果没有的话需要重新开模,厂家依据具体的图纸尺寸就可以进行新模具的生产了。

Therefore, the choice of moulds is mainly based on plastic moulds. If there is no need to re-open moulds, manufacturers can produce new moulds according to the specific drawing size.


U型槽模具特点及作用是按照对于不同应用工程使用的U型槽样式而定的,因为U型槽模具属于定制型的模具,所以按照具体图纸设计的样式,采用何种材质的成为选择模具的关键所在。

The characteristics and functions of U-groove die are determined by the type of U-groove used in different application projects. Because the U-groove die belongs to the customized type, the key to choose the die is the material used according to the design style of the specific drawings.


U型槽模具特点是以底部为平,两侧为斜度样式存在的,整体结构的梯形U型槽尺寸是以上口宽度、下口宽度、高度、长度为数据作为制作模具的根据

The characteristics of U-groove die are that the bottom is flat and the sides are inclined. The dimension of trapezoidal U-groove of the whole structure is based on the data of the width of the upper mouth, the width of the lower mouth, the height and the length of the lower mouth.

                           


而拼接形式的梯形U型槽是以底板规格、侧板规格为主,往往以三件套和五件套为制作内容。

The U-shaped trapezoidal groove with splicing form is mainly composed of bottom plate specifications and side plate specifications, which are usually made of three-piece sets and five-piece sets.


现在,U型槽模具将打开一个新的篇章,智力开发,如果智能开发成功所以不管在许多方面,如质量、生产成本,原材料有很大的提高,沣达模具厂欢迎您的咨询选购!


Now, U-groove mould will open a new chapter, intellectual development. If intelligent development succeeds, no matter in many aspects, such as quality, production cost, raw materials have been greatly improved. Fengda Mold Factory welcomes your consultation and purchase!

版权所有:保定沣达模具制造有限公司
手机:15175361168 电话:0312–6793280
地址:河北省保定市清苑县阎庄乡南阎庄村公司
Keywords:流水槽模具,U型槽模具,电缆槽模具,遮板模具